For your 1991 GMC 1500, the Putco Locker Truck Bed Side Rails - Polished Stainless Steel with Black Nylon Castings Item # P99812 includes the following parts:
- 4 nylon end castings
- 2 tubes
- 1 hardware kit
- 4 rubber expanders
- 4 rubber spacers (for use with Tundras only)
The hardware kit includes the following:
- 4 5/16” X 3” Bolts
- 4 black gaskets
- 4 black bushings
- 4 5/16” X 3” Full threaded bolts
- 4 plastic bolt sleeves
This kit does not include the side rail covers.... view full answer...
Yes, the Reese Remov-A-Ball Gooseneck Trailer Hitch Installation Kit, # 6300-4440, includes everything that you will need for installation and use. The rail kit, 2-5/16 inch hitch ball and the magnetic cover are included.
I have attached a link to the installation instructions for you. view full answer...
Part # RG06-050 is a set of 2 grease seals for a 3500-lb axle. You will need one seal for each hub on your axle so one kit will work for your single axle trailer. These seals have an inner diameter of 1.719-inches (which matches up to the spindle's diameter) and an outer diameter of 2.565-inches (which matches up to the hub's inner bore diameter). The linked diagram may be helpful.
This set of grease seals cross-references with the following other brands of seal: Dexter 010-019-00, Transcom... view full answer...
The # RP30051 Sliding Fifth Wheel Hitch includes the slider, the head unit, the pins and clips needed to secure the hitch into the bed rails and the hardware to attach the head to the slider. I have produced a photo showing the hardware included with the hitch.
The install kit for the fifth wheel hitch, part # RP30035 is not included.
You will also need a trailer connector installed in your truck bed, part # 20023.
To see the instructions for the install kit, click on the provided link. view full answer...
The Westin E-Series Round Nerf Bars part # 23-0500 which is a fit for a 1998 GMC C/K Series Pickup is a complete kit, it comes with both nerf bars and the mounting brackets/hardware needed for installation. The nerf bars are 3" wide. view full answer...